Skip to content

High Carbon Steel / Heat Treated Steel - Metallographic Sample Preparation

Preparing high carbon steel for metallographic analysis is simple when using OnPoint Abrasives' consumables and procedures. We have provided a step by step process for metallographic sample preparation of high carbon steel below.

Sectioning: Section specimen with ToughSec abrasive blade or multi-purpose diamond blade.

Mounting: For best results, compression mount specimen using EpoMount epoxy powder. The high hardness of the epoxy will provide superior edge retention and promote flatness across the entire surface of the mount. 

For samples that require cold mounting, we recommend using EpoPro liquid epoxy system. Employing a vacuum impregnation chamber while conducting the cold mounting procedure effectively eradicates undesired air bubbles from the epoxy material, enabling its penetration into the intricate geometries of your specimen. This may not be required in all instances,

Grinding and Polishing: OnPoint's guidelines for grinding and polishing serve as a reference for preparing samples for metallographic analysis. Our steel alloy procedure is specifically designed for employment on an automated polisher featuring Central Force capability. This procedure uses a contra directional pattern between the working wheel and specimen holder.

When using polishers that possess exclusively Individual Force capability or when opting for manual polishing, the operator should commence the procedure from step number 2. Adjustments are also necessary when using Individual Force or manual polishing. We advise adopting a complimentary directional pattern. For Steps 1 and 2, maintain an RPM of 200/base and 150/head. For steps 3 and 4, reduce the RPM to 150/base and 100/head. It might be necessary to extend polishing durations for all steps.

In this section, we've provided two methods for preparing your steel specimen for analysis, Traditional Method and Advanced Method.

The Traditional Method uses a series of Silicon Carbide grinding papers to first planarize and grind the surface to around 15 micron (600 grit), before moving to polishing steps using suspensions and cloths. This method is effective for general purpose metallography, although it can introduce some relief, or rounding of the specimen's edge.

 TRADITIONAL METHOD FOR PREPARING HIGH CARBON STEEL FOR METALLOGRAPHIC ANALYSIS
Step Abrasive Surface Lube Load/Sample RPM Time
1 180 Grit CarbiPro SiC Water 6 lbs 200 Planar
2 240 Grit CarbiPro SiC Water 6 lbs 200 01:00
3 320 Grit CarbiPro SiC Water 6 lbs 200 01:00
4 400 Grit CarbiPro SiC Water 5 lbs 200 01:00
5 600 Grit CarbiPro SiC Water 5 lbs 200 01:00
5.1 Clean specimens/holder Cotton Ball Water - - -
6 9µm Diamond MasterPlan Cloth Lubricant/Extender 5 lbs 150 05:00
6.1 Clean specimens/holder Cotton Ball Water - - 00:30
7 3µm Diamond GoldStandard Cloth Lubricant/Extender 5 lbs 150 03:00
8.1 Clean specimens/holder Cotton Ball Water - - 00:30
8

0.05µm AlumaPro Alumina

0.04µm ProPrep 2 Colloidal Silica

 SpecCloth Cloth - 5 lbs 150 02:00

Note: Clean specimen by gently scrubbing the surface with a cotton ball under running water. Repeat until all alumina is removed. Use of an ultrasonic cleaner is highly recommended for samples with high porosity content or intricate geometries.

Our Advanced Method uses fewer steps of SiC grinding paper to initially planarize the mounted specimen. This is followed by a series of "loose" abrasive polishing steps that utilize diamond and alumina suspensions along with polishing cloths. The less aggressive nature of this method preserves the specimen's edge and produces ultra-flat results. This can be critical for case depth analysis or for samples that are examined near the specimen's edge. It is viewed by many that the "advanced" methods of preparation offer superior results and higher consistency when compared to traditional methods.

 ADVANCED METHOD FOR PREPARING HIGH CARBON STEEL FOR METALLOGRAPHIC ANALYSIS
Step # Abrasive Surface Lube Load/Sample
 RPM Time
1 180 or 240 Grit CarbiPro SIC Water 6 lbs 200 Planar
2 320 Grit CarbiPro SiC Water 6 lbs 200 02:00
2.1 Clean specimens/holds Cotton Ball Water
 - - 00:30
3 9µm Diamond MasterPlan Cloth Lubricant/Extender
 5 lbs 150 08:00
3.1 Clean specimens/holder Cotton Ball Water - - 00:30
4 3µm Diamond GoldStandard Cloth Lubricant/Extender 5 lbs 150 03:00
4.1 Clean Specimens/holder Cotton Ball Water - - 00:30
5*

0.05µm AlumaPro Alumina

0.05µm ProPrep Colloidal Silica

 SpecCloth Cloth - 5 lbs 150 02:00

 *For the final step, alternate between the alumina and ProPrep colloidal silica at 20 second intervals. Finish with a large dose of alumina when 0:30 seconds remain. 

Clean specimen by gently scrubbing the surface with a cotton ball under running water. Repeat until all alumina is removed. Use of an ultrasonic cleaner is highly recommended for samples with high porosity content or intricate geometries.

Filters

$
$
ChemPro Polishing Cloth
ChemPro Polishing Cloth with Rubber Magnetic Backing 12in
$170.00 - $170.00
$170.00
$170.00 - $170.00
$170.00

ChemPro Polishing Cloth, 12in (305mm), Magnetic Rubber Back

ChemPro is a dense, porous, non-woven cloth designed for high-performance materials preparation. With its fine, porous polyurethane surface, ChemPr...

View full details
$170.00 - $170.00
$170.00
$170.00 - $170.00
$170.00
ChemPro Polishing Cloth
ChemPro Polishing Cloth with Rubber Magnetic Backing 12in
$220.00 - $220.00
$220.00
$220.00 - $220.00
$220.00

ChemPro Polishing Cloth, 12in (305mm), Magnetic Steel Back

ChemPro is a dense, porous, non-woven cloth designed for high-performance materials preparation. With its fine, porous polyurethane surface, ChemPr...

View full details
$220.00 - $220.00
$220.00
$220.00 - $220.00
$220.00
ChemPro Polishing Cloth
ChemPro Polishing Cloth with PSA Backing 12in
$150.00 - $150.00
$150.00
$150.00 - $150.00
$150.00

ChemPro Polishing Cloth, 12in (305mm), PSA

ChemPro is a dense, porous, non-woven cloth designed for high-performance materials preparation. With its fine, porous polyurethane surface, ChemPr...

View full details
$150.00 - $150.00
$150.00
$150.00 - $150.00
$150.00
FinalFloc Metallographic Polishing Cloth
FinalFloc Polishing Cloth with Rubber Magnetic Backing 12in
$90.00 - $90.00
$90.00
$90.00 - $90.00
$90.00

FinalFloc Polishing Cloth, 12in (305mm), Magnetic Rubber Back

FinalFloc is a soft, long-nap polishing cloth made from synthetic fibers, designed for exceptional final polishing across a wide range of materials...

View full details
$90.00 - $90.00
$90.00
$90.00 - $90.00
$90.00
FinalFloc Metallographic Polishing Cloth
FinalFloc Polishing Cloth with Rubber Magnetic Backing 12in
$160.00 - $160.00
$160.00
$160.00 - $160.00
$160.00

FinalFloc Polishing Cloth, 12in (305mm), Magnetic Steel Back

FinalFloc is a soft, long-nap polishing cloth made from synthetic fibers, designed for exceptional final polishing across a wide range of materials...

View full details
$160.00 - $160.00
$160.00
$160.00 - $160.00
$160.00
FinalFloc Polishing Cloth
FinalFloc Polishing Cloth with PSA Backing 12in
$95.00 - $95.00
$95.00
$95.00 - $95.00
$95.00

FinalFloc Polishing Cloth, 12in (305mm), PSA, 10/pkg

FinalFloc is a soft, long-nap polishing cloth made from synthetic fibers, designed for exceptional final polishing across a wide range of materials...

View full details
$95.00 - $95.00
$95.00
$95.00 - $95.00
$95.00
MasterPlan metallographic polishing cloth
MasterPlan Polishing Cloth with Rubber Magnetic Backing 12in
$90.00 - $90.00
$90.00
$90.00 - $90.00
$90.00

MasterPlan Polishing Cloth, 12in (305mm), Magnetic Rubber Back

MasterPlan is a durable, hard, woven polishing cloth made from coated polyester, designed for superior performance in metallographic sample prepar...

View full details
$90.00 - $90.00
$90.00
$90.00 - $90.00
$90.00
MasterPlan metallographic polishing cloth
MasterPlan Polishing Cloth with Rubber Magnetic Backing 12in
$160.00 - $160.00
$160.00
$160.00 - $160.00
$160.00

MasterPlan Polishing Cloth, 12in (305mm), Magnetic Steel Back

MasterPlan is a durable, hard, woven polishing cloth made from coated polyester, designed for superior performance in metallographic sample prepar...

View full details
$160.00 - $160.00
$160.00
$160.00 - $160.00
$160.00
MasterPlan Polishing Cloth
MasterPlan Polishing Cloth with PSA Backing 12in
$105.00 - $105.00
$105.00
$105.00 - $105.00
$105.00

MasterPlan Polishing Cloth, 12in (305mm), PSA

MasterPlan is a durable, hard, woven polishing cloth made from coated polyester, designed for superior performance in metallographic sample prepara...

View full details
$105.00 - $105.00
$105.00
$105.00 - $105.00
$105.00
MintPlus Polishing Cloth
MintPlus Polishing Cloth with Rubber Magnetic Backing 12in
$90.00 - $90.00
$90.00
$90.00 - $90.00
$90.00

MintPlus Polishing Cloth, 12in (305mm), Magnetic Rubber Back

MintPlus is a napped polishing cloth made from durable synthetic fibers, designed for efficient, one-step polishing of steels and sintered carbides...

View full details
$90.00 - $90.00
$90.00
$90.00 - $90.00
$90.00
MintPlus Polishing Cloth
MintPlus Polishing Cloth with Rubber Magnetic Backing 12in
$160.00 - $160.00
$160.00
$160.00 - $160.00
$160.00

MintPlus Polishing Cloth, 12in (305mm), Magnetic Steel Back

MintPlus is a napped polishing cloth made from durable synthetic fibers, designed for efficient, one-step polishing of steels and sintered carbides...

View full details
$160.00 - $160.00
$160.00
$160.00 - $160.00
$160.00
MintPlus Polishing Cloth
MintPlus Polishing Cloth with PSA Backing 12in
$105.00 - $105.00
$105.00
$105.00 - $105.00
$105.00

MintPlus Polishing Cloth, 12in (305mm), PSA, 10/pkg

MintPlus is a napped polishing cloth made from durable synthetic fibers, designed for efficient, one-step polishing of steels and sintered carbides...

View full details
$105.00 - $105.00
$105.00
$105.00 - $105.00
$105.00
PlanarMesh polishing cloth, 12in, magnetic steel
$160.00 - $160.00
$160.00
$160.00 - $160.00
$160.00

PlanarMesh Polishing Cloth, 12in (305mm), Magnetic Rubber Back

PlanarMesh is a unique metal mesh pad that provides excellent flatness on hard materials while preserving the specimen's edge. Specifically designe...

View full details
$160.00 - $160.00
$160.00
$160.00 - $160.00
$160.00
PlanarMesh polishing cloth, 12in, magnetic steel
$240.00 - $240.00
$240.00
$240.00 - $240.00
$240.00

PlanarMesh Polishing Cloth, 12in (305mm), Magnetic Steel Back

PlanarMesh is a unique metal mesh pad that provides excellent flatness on hard materials while preserving the specimen's edge. Specifically designe...

View full details
$240.00 - $240.00
$240.00
$240.00 - $240.00
$240.00
PlanarMesh polishing cloth, 12in, magnetic steel
$140.00 - $140.00
$140.00
$140.00 - $140.00
$140.00

PlanarMesh Polishing Cloth, 12in (305mm), PSA

PlanarMesh is a unique metal mesh pad that provides excellent flatness on hard materials while preserving the specimen's edge. Specifically designe...

View full details
$140.00 - $140.00
$140.00
$140.00 - $140.00
$140.00
ProDac Polishing Cloth
ProDac Polishing Cloth with Rubber Magnetic Backing 12in
$90.00 - $90.00
$90.00
$90.00 - $90.00
$90.00

ProDac Polishing Cloth, 12in (305mm), Magnetic Rubber Back

ProDac is a soft, woven polishing cloth made from synthetic satin, designed for exceptional performance in intermediate to fine polishing stages on...

View full details
$90.00 - $90.00
$90.00
$90.00 - $90.00
$90.00
ProDac Polishing Cloth
ProDac Polishing Cloth with Rubber Magnetic Backing 12in
$160.00 - $160.00
$160.00
$160.00 - $160.00
$160.00

ProDac Polishing Cloth, 12in (305mm), Magnetic Steel Back

ProDac is a soft, woven polishing cloth made from synthetic satin, designed for exceptional performance in intermediate to fine polishing stages on...

View full details
$160.00 - $160.00
$160.00
$160.00 - $160.00
$160.00
ProDac Polishing Cloth
ProDac Polishing Cloth with PSA Backing 12in
$105.00 - $105.00
$105.00
$105.00 - $105.00
$105.00

ProDac Polishing Cloth, 12in (305mm), PSA, 10/pkg

ProDac is a soft, woven polishing cloth made from synthetic satin, designed for exceptional performance in intermediate to fine polishing stages o...

View full details
$105.00 - $105.00
$105.00
$105.00 - $105.00
$105.00
RedFelt Polishing Cloth
RedFelt Polishing Cloth with Rubber Magnetic Backing 12in
$90.00 - $90.00
$90.00
$90.00 - $90.00
$90.00

RedFelt Polishing Cloth, 12in (305mm), Magnetic Rubber Back

RedFelt is a soft, napped polishing cloth made from durable wool fibers. Its versatile design makes it a common choice for both intermediate and fi...

View full details
$90.00 - $90.00
$90.00
$90.00 - $90.00
$90.00
RedFelt Polishing Cloth
RedFelt Polishing Cloth with Rubber Magnetic Backing 12in
$160.00 - $160.00
$160.00
$160.00 - $160.00
$160.00

RedFelt Polishing Cloth, 12in (305mm), Magnetic Steel Back

RedFelt is a soft, napped polishing cloth made from durable wool fibers. Its versatile design makes it a common choice for both intermediate and fi...

View full details
$160.00 - $160.00
$160.00
$160.00 - $160.00
$160.00
RedFelt Polishing Cloth
RedFelt Polishing Cloth with PSA Backing 12in
$120.00 - $120.00
$120.00
$120.00 - $120.00
$120.00

RedFelt Polishing Cloth, 12in (305mm), PSA, 10/pkg

RedFelt is a soft, napped polishing cloth made from durable wool fibers. Its versatile design makes it a common choice for both intermediate and fi...

View full details
$120.00 - $120.00
$120.00
$120.00 - $120.00
$120.00
$90.00 - $90.00
$90.00
$90.00 - $90.00
$90.00

ShortFinal Polishing Cloth, 12in (305mm), Magnetic Rubber Back

ShortFinal is an exceptionally soft, low-nap cloth designed for final polishing. The low profile of the rayon fibers minimizes relief or edge round...

View full details
$90.00 - $90.00
$90.00
$90.00 - $90.00
$90.00
$160.00 - $160.00
$160.00
$160.00 - $160.00
$160.00

ShortFinal Polishing Cloth, 12in (305mm), Magnetic Steel Back

ShortFinal is an exceptionally soft, low-nap cloth designed for final polishing. The low profile of the rayon fibers minimizes relief or edge round...

View full details
$160.00 - $160.00
$160.00
$160.00 - $160.00
$160.00
SimpleNylon metallographic polishing cloth
SimpleNylon Polishing Cloth with Rubber Magnetic Backing 12in
$90.00 - $90.00
$90.00
$90.00 - $90.00
$90.00

SimpleNylon Polishing Cloth, 12in (305mm), Magnetic Rubber Back

SimpleNylon is a medium-hard, woven polishing cloth with no nap, designed for fast material removal and excellent flatness during coarse polishing ...

View full details
$90.00 - $90.00
$90.00
$90.00 - $90.00
$90.00